Homepage / Products / Easylube® Automatic Lubricators / Easylube® EX Series
ATEX international explosion proof certified
Comply with IECEx test standards
Non-sparking safety motor
Super reinforced protection case
Intuitive tri-color indicator lights
Five years warranty
Built-in NFC sensor chip (RFID), will be paired with inspection software to perform on-site inspection.
IP66 Dustproof and Waterproof Rating Certified
24-hour active monitoring, once the equipment is abnormal, it will immediately blink the warning light.
The patented grease injection pressure monitoring system can ensure that grease is smoothly injected into the bearing for lubrication.
The grease injection period can be set according to the lubrication conditions required by the bearing to the range of 0.5-12 months.
The lubricator checking mode function can be used to check whether the lubricator is operating normally or not.
|Product Model||EX-150 EX|
|Outlet Diameter||1/2" PT (M)|
|Grease Volume||150 ml|
|Grease Interval Range||Adjustable from 0.5 to 12 months|
|Operating Environment Temperature Range||-20 ~ 60°C (-4 ~ 140°F)|
|Pressure Plate Thrust (Piston)||5 - 150 psi
Automatic adjustment according to bearing's back pressure
|Outlet Pressure (Grease Cup Outlet)||Less than 10 bars to prevent grease leakage through the shaft seal|
|Operation Indicator||Green light：Normal schedule
Single orange light：Low battery voltage
Orange light：Abnormal grease injection
Red light：Grease injection cycle completed
|Product Size (Height x Diameter)||15.7 x 8.35 cm (6.18 x 3.28")|
|Original Equipment Manufacturer Service Pack||Rated Power (Battery Specification)
Easylube® P-613A 6V x 1600 mAh , V0
|Grease Refiller (Grease Specification)
Easylube® 1000 High Speed Grease
Easylube® 1500 Multi-Purpose Grease
Easylube® 2000 High Efficiency Grease
Easylube® 5000 Food Grade Grease
DIY empty grease cup kit
|ATEX Hazardous Location Application Specification||II 3 G EX ec IIC T6 Gc
DEMKO 20 ATEX 2227X
|Dustproof and Waterproof Grade||IP66|
|CE Certification||EMC SGS Reference NO.：MH/2020/10001C
RED SGS Reference NO.：MH/2020/10002C